Prox01: Unterschied zwischen den Versionen

Version vom 25. März 2025, 15:20 Uhr

2 x Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (2 Sockets) --> 16 Kerne / 32 Nutzbare Threads

254GB RAM DDR3

4x 1TB SSD RAID5 (3TB nutzbar)

@@ Zeile 38: / Zeile 38: @@
 |}
-== Netzwerk-Config ==
+==== Hardware ====
-<blockquote>auto lo
+x Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (2 Sockets) --> 16 Kerne / 32 Nutzbare Threads
-iface lo inet loopback
+GB RAM DDR3
-auto eno4
+x 1TB SSD RAID5 (3TB nutzbar)
-iface eno4 inet manual
-iface eno1 inet manual
-iface eno2 inet manual
-auto eno3
-iface eno3 inet manual
-auto bond0
-iface bond0 inet manual
-        bond-slaves eno3 eno4
-        bond-miimon 100
-        bond-mode balance-alb
-auto vmbr0
-iface vmbr0 inet static
-        address 185.89.198.4/22
-        gateway 185.89.196.1
-        bridge-ports bond0
-        bridge-stp off
-        bridge-fd 0
-#Networkports
-iface vmbr0 inet6 static
-        address 2a03:8460:1:3:4:ffff:ffff:fffe/48
-        gateway 2a03:8460:1::1
-auto vmbr1
-iface vmbr1 inet static
-        address 172.6.0.1/30
-        bridge-ports none
-        bridge-stp off
-        bridge-fd 0
-        post-up   iptables -t nat -A POSTROUTING -s '172.6.0.0/30' -o vmbr0 -j MASQUERADE
-        post-down iptables -t nat -D POSTROUTING -s '172.6.0.0/30' -o vmbr0 -j MASQUERADE
-#pfSense WAN
-auto vmbr2
-iface vmbr2 inet manual
-        bridge-ports eno1
-        bridge-stp off
-        bridge-fd 0
-        bridge-vlan-aware yes
-        bridge-vids 2-4094
-#VM net</blockquote>